Vixen Atera H 10X21 Stabilised Binoculars
EQUIPPED WITH ANTI-VIBRATION MECHANISM! STABLE IMAGE THAT DOES NOT BOTHER CAMERA SHAKE
The appeal of binoculars is that you can easily look through them with your hands, but sometimes you cannot see what you want to see due to camera shake. This is especially noticeable at high magnification. The Atera H10 × 21 is equipped with a camera shake correction mechanism using a 2-axis gimbal control vibration isolation mechanism. A stable field of view can be obtained due to the powerful correction effect of anti-vibration correction angle ± 3 degrees (up / down / left / right). Since it also suppresses minute vibrations, it is effective for observing details such as the brilliance of bird's eyes and the pattern of feathers. Also, when observing stars, you can observe stars that are about 1 magnitude darker than usual, which cannot be seen well if there is blurring.
THE SECOND GENERATION THAT HAS BECOME EVEN LIGHTER. ULTRA-LIGHTWEIGHT DESIGN THAT CAN BE EASILY HANDLED WITH ONE HAND
We succeeded in significantly reducing the weight by 64g compared to the lightest class H12 × 30, and achieved the world's smallest 130 × 107 × 63mm and lightest 358g as binoculars equipped with anti-vibration mechanism! *. You can use it more comfortably without getting your hands tired even if you use it for a long time. * For binoculars equipped with anti-vibration mechanism (batteries not included). According to our research in October 2019.
12 HOURS OF STAMINA ON AAA BATTERIES
Two AAA batteries are used as the power source. It is easy to obtain regardless of the area, so it is safe for field observations and live performances in remote areas. Moreover, the stamina design has an operating time of about 12 hours. You can concentrate on observation without worrying about battery consumption. (Uses new alkaline batteries. At 20 ° C). Equipped with an auto power off function that automatically turns off the power after 5 minutes. Prevents unnecessary battery consumption.
CLEAR AND CLEAR VIEW WITH 3 COATS
Uses a fully multi-coat with an anti-reflection multilayer coating on the entire lens surface. The prism uses a phase coat that reduces halation and dramatically increases the resolution, and a highly reflective coat that increases the brightness of the image. The three coats thoroughly eliminate stray light and light loss, providing a clear and extremely clear view.